- March Highlands
- Bilberry Creek
- Graham Creek
- Nakkertok Fall 2020
- Nakkertok Ski-O
- SJAM Family Day
- Ski/Snowshoe-O Wesley Clover
- Ski/Snowshoe-O Constance Bay
- Ont Champs 2019 Long
- Ont Champs 2019 Middle
- All Events On Orienteering Canada
RouteGadget is a free web utility developed by a Finnish orienteer Jarrko Ryypo, which is designed to give orienteers the ability to upload (GPS) or draw and share their routes. Jarrko’s website has an index linking to RouteGadget sites from 22 countries and over 11,000 events. Orienteering Ottawa RouteGadget events are hosted by Orienteering Canada on their website.
After the completion of an Orienteering Ottawa event, the maps and results will be uploaded to the RouteGadget website where runners can view the courses, select up to 10 competitors from a course and replay the race by simulating a “Mass Start”. If you have a GPS watch and have recorded your race, you can upload this to the site and view your actual route – not the one you thought you did! Or try drawing your route from memory and then uploading your GPS file to compare. Once you have analyzed your own route, how about seeing the routes of other runners and comparing choices.
Note: There is a brief section recently added below on accessing SplitsBrowser from RouteGadget.
Orienteering Canada provides general instructions on using RG, including detailed instructions on how to draw your own route, at RouteGadget Instructions but below is a summary of the details on adding your own GPX file to an event and a few notes on drawing a route:
After opening up the specific event in RouteGadget:
Be patient - it will take 20-30 seconds for your file to upload.
If you do not have a GPS file you can draw your route from memory by clicking the "Draw your route" box on the upper right of the page. Select your course and name and, using the mouse click, draw your path between controls. With "Snap on/off" set 'On', your route will snap to each control point as you reach it (using 'Off' sometimes seems to result in a bug). Make sure your drawing actually 'Snap' - it should change the blue line to the next control. A drawn route will replace the default point to point route used in animations and the speed between controls will be based on the split times. To test your memory, try drawing your route and then uploading your GPS route and compare. Hint: When you first open an event page, the Event Comment Box has a "<<Touchmode>>" option. If you click this initially, it will allow you to draw your route using a finger/stylus on a touch screen or the mouse as a pen (rather than clicking along a path). If you have selected "Draw your route" without using the "Touch mode", you will need to reload the event to change modes.
NOTE: As hinted at above - note that you can both upload your gps route and draw your route! Another good exercise - draw your route first, not based on where you remember but take your time and select the best map routes. Then upload your actual route and ask "why did I go that way??"!
NOTE: As mentioned earlier, you can select names that do not have GPS uploaded courses. RouteGadget will show the participant moving along the direct line between controls (no actual route) but the timing will match the actual time between points.
Included with RouteGadget is the SplitsBrowser application to analyse and compare performance of runners in detail. If you start at the main Orienteering Canada RouteGadget page, you will see the option to go directly to the SplitsBrowser page for the event. If however you have already selected an event and are within the RouteGadget page, you need to do a couple of extra steps to access the SplitBrowser window. You need to select at least one runner from the course you are interested in and click "Load Animation" (just as you would to see routes). This will display, up in the right top corner, a summary table of the splits for the selected runner(s) as well as provide a link to '<<SplitsBrowser>>'. Select this link to open the SplitsBrowser window and you can select any of the other courses for the specified event. Note that, on occasion, the site will open but the content may not download - just refresh the page and it should come up.
RouteGadget will load only route files in the .GPX format. Most of the more current Sport Watches use a .FIT file format for stored activities (and .TCX for some older models). There are many easy ways to obtain a .GPX file from your activity but the best choice will depend on how you normally store/view/analyse your activity data. The majority of sites, such as Garmin Connect, Strava, SportsTracks etc provide the ability to export a .GPX file. For example, with Garmin Connect, open the specific activity and you should see a small gear icon on the upper right (within the white portion of the screen). Click on this and you will see a number of export options, including ‘Export to GPX’. If you want to directly convert a .FIT or .TCX file, there are a number of standalone applications such as GPSBabel that will do this. In addition, there are also many web services that will also provide a quick and easy conversion such as GPSies